Transducers

The Raymarine E66085, B60 20 Bronze Low Profile Thruhull Transducer with 20 degree tilted element and temp is designed to work on boats with deadrise between 16 and 24 degrees. Does not need Fairing Block. (Depth/Temp).

The Garmin 8 Pin B117 600W Bronze Low Profile Thru-Hull Transducer works on boats with up to 7 degree deadrise for GSD 24. Includes temp and does not need Fairing Block. Garmin part# 010-10182-21.
(Depth/Temp)

Garmin 010-10982-21, 8 Pin B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element and temp is designed to work on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block.
(Depth/Temp)

The Lowrance HDI 50/200 & 455/800khz Skimmer Transducer.

The Garmin Transom Mount Dual Frequency 50/200khz Transducer provides accurate depth and temp readings.
(Depth/Temp)

Use this wire block to adapt your existing transducer to a Garmin 8-Pin connector.

View Fish and Bait swimming around your boat in Real Time with Garmin Panoptix PS30 Transom Mount Transducer. Connected via the Garmin Network the PS-30 Transducer provides LiveVü Down, RealVü 3-D Down and RealVü 3-D Historical.

Garmin B175 1kW medium frequency CHIRP transducer, 8-Pin Low profile, bronze thru-hull housing for vessels with deadrises of 16-24-degrees.

The Garmin M265C-LH is a top performing, 1kW In-Hull Transducer providing crystal clear underwater detail. Reaching 3,000' the M265 CHIRP operates at a frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees or 6 to 10 degrees; and a 0 to 30 degree deadrise.

Raymarine Low Profile, Thru Hull, 20-degree tilt Conical High Frequency CHIRP Transducer. The CPT-S is compatible with Raymarine’s CP100 sonar module and embedded CHIRP Multi-Function Displays.

The Navico P66 Transom Mount 600w Dual Frequency Transducer provides accurate depth and temperature readings to your compatible Lowrance or Simrad fishfinder or multifunction display equipped with a 9-Pin XSONIC connection.
(Depth/Temp Only)

The Navico plastic replacement bracket for StructureScan 3D and TotalScan transducers allow for mounting directly to the transom, on the jackplate or under the step.

The Airmar M265C-LH Chirp Transducer uses Broadband CeramicTechnology for crystal clear image detail and resolution. Increased resolution allows you to easily distinguish individual fish targets in the water column or close on the bottom. (Low and High Frequencies, Depth Only) - 12-Pin Garmin Mix and Match Cable Included.

The Lowrance Active Imaging HD Fishreveal transducer provides Lowrance High/Wide CHIRP, SideScan and DownScan imagery. Enjoy Lowrance FishReveal DownScan and SideScan when paired with an S3100 sonar module, sold separately.

The P79 Flange Kit includes a replacement plastic mounting base and locking ring and is compatible with all P79 transducers.

Airmar 600W Transom Mount High Wide Frequency CHIRP transducer. 9-Pin Navico XSONIC Mix and Match Cable Included. Compatible with Lowrance or Simrad Fishfinders with 9-pin XSONIC Connector.

Airmar B60 Low Profile 20 Degree 600W Dual Frequency Bronze Thru-Hull Transducer. 9-Pin XSONIC Connector and 10M Cable Included. Provides Depth and Temperature Readings.

Airmar B744V 600W traditional dual frequency transducer, thru-hull with Fairing Block. 6-Pin Garmin Mix and Match Cable Included.

Airmar Low Profile 20 degree tilt High Wide Frequency CHIRP transducer. No Connector. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 

The Furuno 600W high-frequency, wide-beam CHIRP transducer operates on a high frequency range of 150-250 kHz and features a super-wide 30-degree average beamwidth. The Furuno TM165HW has a 10-pin transducer connector.

The Furuno 455kHz CHIRP Side-Scan Thru Hull Transducer Pair is compatible with NavNet TZTouchXL displays as a direct connection to TZT10X, TZT13X and TZT16X MFD's and has a stainless steel construction. This higher frequency transducer provides high resolution and impressive range.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 12-pin plug on the other side. This cable is compatible with Furuno CHIRP, 12-pin transducers.

The Airmar Mix & Match Cable with Raymarine a-Series Connector is 9m in length and has a 5-pin 600W Mix and Match end on one side and a Raymarine a-Series connector on the other side.

Experience complete visibility with Active Target 2 XL! Expansive 180° XL live views across Forward, Down, and Scout modes—all powered by a single Active target XL transducer.
Requires active target 2 or Active target 2 XL module.

The Raymarine B744V Bronze Thru-Hull Transducer is a dual frequency, 50/200kHz, 600w triducer that provides accurate readings of speed, depth, and temp and comes with a high speed fairing block.

The DST810 is a plastic thru-hull smart sensor that will provide digital depth(numbers only), speed and temp to any existing NMEA 2K network.

The DT812 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.

Lowrance B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element. Works on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSE/NSS/BSM-1.
(Depth/Temp)

The Raymarine E66086, B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element and temp is designed to work on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. (Depth/Temp)

The Furuno Plastic Thru Hull Dual Frequency Transducer provides accurate depth readings for Furuno fishfinders and sounder modules. 50/200khz. Requires In Hull Mount or fabrication of a fairing block.
(Depth Only).

The Furuno 235DST-MSE is a Thru-Hull Smart Sensor that operates at 235khz so that it will not interfere with your 200khz fishfinder. This transducer will provide numerical depth, speed and temperature readings to your compatible Furuno display.

The Raymarine E66087, B60 20 Bronze Low Profile Thruhull Transducer with 20 degree tilted element and temp is designed to work on boats with deadrise between 16 and 24 degrees. Does not need Fairing Block. (Depth/Temp)

The Garmin 8 pin B260 1kW Bronze ThruHull Transducer with high speed fairing block provides the best fishfinding performance thanks to broadband technology. 50/200Khz Dual Frequency.
(Depth/Temp)

The Garmin B744 V 8 Pin Bronze Thruhull Transducer for GSD 24, Garmin Chartplotter/Sounder or Garmin Fishfinder with fairing block operates at 50/200KHZ and provides accurate Depth, Speed and Temperature readings.
(Depth/Speed/Temp)

Lowrance P79 Plastic In-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The in-hull transducer mounts inside the boat and will work on boats with deadrise up to 22 degrees. 50/200khz Transducer.

The Raymarine B265LH Chirp Transducer uses Broadband CeramicTechnology for crystal clear image detail and resolution. Increased resolution allows you to easily distinguish individual fish targets in the water column or close on the bottom.(Low and High Frequencies, Depth and Temp)

Garmin 8 Pin B619 Bronze Thru-Hull 20 degree tilted element Transducer with Temp is a top choice for boats with fiberglass or metal hulls. Designed for boats with a 16-24 degree deadrise.

Lowrance Dual Frequency 455/800 kHz DSI Transducer With Temperature. Compatible with Lowrance DSI Units only. Includes 20 ft cable, mounting bracket and hardware.

Garmin 8 Pin B619 Bronze Thru-Hull 12 degree tilted element Transducer with Temp is a top choice for boats with fiberglass or metal hulls. Designed for boats with a 8-15 degree deadrise.

Airmar B175 1kW high-wide frequency CHIRP transducer, bare wire connection (adapter, wiring block required) Low profile, bronze thru-hull housing for vessels with deadrises of 16-24-degrees.

Airmar B175 1kW low frequency CHIRP transducer, Mix-and-Match End with no Mix-and-Match cable included. Can also be used for bare wire connection by cutting end and exposing wires. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Garmin's GT 22HW-TM Transducer provides depth and temperature readings. Perfect for Freshwater fishing the GT22 HW includes CHIRP Traditional Sonar and CHIRP ClearVu for near photo-like images below your boat while consistently displaying crisp clear fish arches and enhanced target separation.

Garmin Water Temperature Probe with 8-Pin Connector and Y-Cable. Provides water temperature for boats with in-hull transducer that do not come into contact with the water.

Navico's XSONIC SS175 Stainless Steel High Wide CHIRP Transducer is designed for Fiberglass and Wood Hulls with a Deadrise of 16°-24°. Depth and Temp, 9 Pin XSONIC Black Connector. Compatible with Simrad NSS Evo3 and Lowrance HDS Carbon Units.

The 165T-B54 is a multi-beam thru-hull transducer for the DFF3D. Included fairing block allows for installation on inboard vessels and a built-in temp sensor provides accurate water temperature.

The RV100 From Raymarine provides RealVision Sonar to Compatible Axiom RV and Axiom PRO RVX Displays. View Structure and Fish with life-like quality of RV 3D Sonar.

The RV212 Bronze Port and Starboard Thru-Hull Transducers from Raymarine provide RealVision Sonar to Compatible Axiom RV and Axiom PRO RVX Displays. View Structure and Fish with life-like quality of RV 3D Sonar. Designed for boats with a deadrise of 5°-15°

The RV220 Bronze Port and Starboard Thru-Hull Transducers from Raymarine provide RealVision Sonar to Compatible Axiom RV and Axiom PRO RVX Displays. View Structure and Fish with life-like quality of RV 3D Sonar. Designed for boats with a deadrise of 15°-25°