Garmin's SteadyCast Heading Sensor offers a simple solution to heading accuracy. Easy to Install with a 10Hz output rate and accuracy to +/- 3°
GAX1141710
Our Price$134.95
|
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network. |
The SCX20 with NMEA2000 connections from Furuno provides reliable and accurate heading for your Furuno Radar, Fish Finders, Sonar, and Autopilots. Four separate GNSS Antennas provide Accurate heading info allowing your Furuno Autopilot to keep a better course, saving time, fuel, and money while the precise pitch, roll, and heave information stabilizes the display for many Furuno Fish Finders and Sonars.
FUSCX20
(Rating 89)
Our Price$995.00
|
The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.
GA00671
(Rating 90)
Our Price$141.95
|
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter |
Connect New and Old networks. Convert NMEA 0183 data into NMEA 2000 data and vice versa allowing them to talk and listen to each other. |
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable. |
This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters.
GAX110761
Our Price$29.95
|
Furuno GP330B NMEA2000 GPS Receiver is designed for pinpoint accuracy with your Furuno NavNet 3D or TZtouch Display. NMEA 2000 Network Required when installing without DRS Radar.
FUGP330B
(Rating 83)
Our Price$319.95
Backorder,
Expected 10/23/2020
|
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter. |
The Navico NMEA 2000 Starter Kit includes all of the parts neccessary to create a NMEA2000 Network on your boat. |
The Garmin GPS 19x NMEA 2000 Antenna is a highly-sensitive GPS Receiver that has 32-channels to provide the enhanced position accuracy, heading and speed.
GA0101010
(Rating 90)
Our Price$204.95
|
Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.
NVX12612001
Our Price$49.95
|
The Navico NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone and uses one end of the T-Connector for the drop cable. |
Garmin NMEA 2000 Multiport T-Connector.
GAX1107801
Our Price$46.95
|
The Raymarine DeviceNet (Male) to STng (Female) snap-on spur adaptor allows for easy connection with NMEA2000 devices.
RAXA06083
(Rating 92)
Our Price$19.95
|
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter. |
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter. |
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable. |
The DT812 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.
AIDT812PVN2
Our Price$299.95
|
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
GAX110762
Our Price$34.95
|
The PG-700 Integrated NMEA 2000 Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.
FUX700
(Rating 79)
Our Price$699.95
|
Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network. |
Garmins 9 Axis Heading Sensor provides accuracy +/- 2°. 10Hz Output Rate ensures your chart orientation and boat heading is accurate with reality. Premium Heading Accuracy at low speeds and even when bow is pitching, rolling or heeling over.
GAX1141720
Our Price$529.95
|
The Actisense NGT-1, NMEA 2000 to PC Interface cable provides an easy way to link a PC to a NMEA 2000 network. NMEA 2000 compliant software applications can read from and write to the NMEA 2000 Bus while maintaining network safety.
ATNGT1USB
(Rating 89)
Our Price$229.95
|
The Actisense 8-port self-contained NMEA 2000 network makes installing a NMEA 2000 system easier than ever. The SBN-2 is a complete 8-port NMEA network that includes built-in termination resistors. Simply attach the integrated 3-meter power cable to the boats power supply and you are ready to add your devices!
ATSBN2
(Rating 92)
Our Price$164.95
|
The Actisense W2K-1 is a NMEA 2000 to Wi-Fi Gateway which transfers data from a NMEA 2000 backbone to any device (e.g laptop, tablet or smartphone) connected to it via Wi-Fi. |
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter |
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee. |
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee. |
A Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network. |
The DST800 is a plastic thru-hull smart sensor that will provide digital depth(numbers only), speed and temp to any existing NMEA 2K network.
AIDST800PVN2
(Rating 80)
Our Price$319.95
Usually Ships
in 2-3 Days
|
The DT820 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.
AI820PVN2
Our Price$249.95
|
This NMEA 2000 P39 transom mount smart sensor provides digital depth, speed and temp to any existing NMEA 2K network. Includes 2m drop cable to connect to your existing NMEA 2k Backbone.
AIP39235N2
Our Price$309.95
Usually Ships
in 2-3 Days
|
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector. |
The Garmin NMEA 2000 network updater provides the convenience of updating Garmin products and NMEA 2000 accessories that do not have an SD card slot.
Usually Ships
in 2-3 Days
|
The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee. |
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee. |
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator. |
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee. |
| |