Garmin Marine Accessories

Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.

The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.

The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.

Garmin Protective Cover for ECHOMAP Ultra 122sv and 126sv.

Display Cover for ECHOMAP UHD2 72cv, 73cv, 74cv and 75cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus, UHD or UHD2 'sv' units

Garmin Bail Mount with Quick Release Bracket for 9" echoMAP PLUS 93sv and 94sv units as well as ECHOMAP UHD 93/94sv.

Garmin Marine Network Cable (20').

Protect your Garmin GPSMAP 8x10 series GPS display from scratches and sun when not in use!

Garmin GA 38 remote gps antenna with 30' cable. Fits standard 1" marine mount.

Protect your Garmin GPSMAP 12x2 series GPS display from scratches and sun when not in use!

Protect your compatible Garmin VHF radio from the elements! Compatible with Garmin VHF 210, 210 AIS, 215 and 215 AIS Radios.

Garmin Bracket Mount with Quick Release Cable for 7" and 9" echoMAP CHIRP SV units. Does not work with PLUS or UHD models.

Garmin adapter cable connects an 8-pin transducer with XID to a 12-pin sonar port on compatible Garmin GPS / Fishfinder units.

Garmin 4-Pin Power/Data Cable for Select 7" and 9" echoMAP CHIRP, echoMAP Plus, ECHOMAP UHD, and GPSMAP 1242xsv Chartplotter Fishfinders.

Garmin Bracket Mount with Quick Release for 7" CHIRP CV and DV units.

Garmin NMEA 2000 Multiport T-Connector.

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 10 feet long (3 meters).

Protect your Garmin GPSMAP 9x3 series GPS display from scratches and sun when not in use!

Protect your Garmin GPSMAP 8x12 series GPS display from scratches and sun when not in use!

Protective cover for Garmin Echomap Ultra 2 12" Displays. Compatible with Echomap Ultra 2 Displays Only!

Garmin 10 foot transducer extension cable for Garmin 12-Pin Transducers.

This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).

Garmin's 4-Pin Power/Data Cable. 6Ft Cable includes NMEA0183 inputs/outputs.

Garmin's GHS 11 Wired Handset provides a 2" diagonal dot matrix display with a rotary/push knob for volume, squelch and channel selection. Offers intercom capabilities when connected to a speaker.

Garmin Protective Cover for echoMap Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv units.

Garmin Heavy Duty Transom Mount with Spray Shield

The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 30 feet long (9 meters).

Protect your Garmin GPSMAP 12x3 series GPS display from scratches and sun when not in use!

Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.

This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter

This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.

Garmin 10' Transducer Extension Cable for 4-Pin Transducers.

Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.

Garmin adapter cable connects a Garmin 8-pin transducer to a Garmin 4-pin display including Garmin echo, echoMAP, echoMAP CHIRP, ECHOMAP UHD2, or STRIKER™ series fishfinder.

Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv.

Garmin Protective Cover for ECHOMAP Ultra 102sv and 106sv.

Garmin 6' Power/Data cable for all ECHOMAP Ultra units. Includes NMEA0183 Input/Output.

Protect your Garmin GPSMAP 7x3 series GPS display from scratches and sun when not in use!

Display Cover for 9" ECHOMAP UHD2 SV units  - 92SV, 93SV and 94SV GPS/Fishfinders.
Does Not work with Garmin 9" Echomap Plus or UHD units

Use this Garmin Power Plug to add a 70A power plug to your Garmin Force trolling motor.

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 3 feet long (1 meter).

Garmin's Transom Mount bracket allows you to attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat providing excellent sonar returns at all speeds.

Garmin Power Cable for 42xs, 43xs, 44xs, 52xs, 53xs and 54xs Series Chartplotter/Sounders. Replacement part.

Garmin Power Cable for 720s and 740s Chartplotter/Sounders. Replacement part.

Garmin Marine Network Cable (6').

The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.

Paired with a GHP20, GHP12 or Reactor Garmin’s GFR 10 will provide rudder position and detect and avoid rudder stops while on the water. Magnetic sensor relays position information so that you know where the rudder is without having to guess.