Airmar Accessories

The Single Arm Holding Wrench fits the B164 and B175/SS175 transducers and assists with installation. This wrench fits on the top of the transducer and holds it in place during installation. This wrench can be used in tandem with the Single Arm Wrench or Double Arm Wrench.

The Double Arm Wrench fits the B164 and B175 transducers and assists with installation. The Double Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

The Single Arm Wrench fits the B164 and B175 transducers and assists with installation. The Single Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

The P79 Flange Kit includes a replacement plastic mounting base and locking ring and is compatible with all P79 transducers.

The Airmar Mix & Match Cable for Navico XSONIC M/H CHIRP Transducers is 1m in length connects to your compatible Airmar transducer with a 12-pin Mix and Match connector on one side and your compatible Navico fishfinder's 9-Pin XSONIC connector on the other side.

Extend your Garmin 6-pin transducer cable 20 feet with the Airmar Transducer Extension Cable.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 12-pin plug on the other side. This cable is compatible with Furuno CHIRP, 12-pin transducers.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Humminbird 14-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Humminbird 14-pin plug on the other side.

The Airmar 10' Extension Cable for CHIRP Mix & Match Cables is 3m in length and extends the length of your Airmar Mix & Match Cable. This cable features a 12-pin Mix & Match male end, and a 12-pin Mix & Match female end. 

The Airmar Mix & Match Cable for 600W Navico Blue is 8m in length and has a 5-pin 600W Mix and Match end on one side and a Navico 7-pin Blue connector on the other side.

The Airmar Mix and Match cable for Garmin 600W 6-Pin connects to a compatible Airmar Transducer with 5-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Garmin 6-pin sonar port.

The Airmar Mix and Match cable for Furuno CHIRP 10-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Furuno 10-pin sonar port.

The Airmar Mix and Match cable for SiTex CHIRP 8-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a SiTex 8-pin sonar port.

The Airmar Mix and Match cable for Navico (Simrad and Lowrance) Low Frequency CHIRP 9-Pin XSONIC connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Navico 9-pin XSONIC sonar port.

The Airmar Mix and Match cable for Garmin Low CHIRP 12-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Garmin 12-pin sonar port.

Extend your Garmin 6-pin transducer cable 10 feet with the Airmar Transducer Extension Cable.

Mount your compatible 1kW transom mount transducer with the transom mount bracket kit. This high performance bracket is compatible with the Airmar TM258, TM260, TM265, TM270W and TM275C housings.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Bare Wires is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector on one side and provides bare wires on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 10-Pin Low Frequency Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 10-pin plug on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Raymarine 11-Pin High and Medium Frequency Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Raymarine 11-pin plug on the other side. This cable is compatible with High or Medium Raymarine 11-pin CHIRP transducers.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 12-pin plug on the other side. This cable is compatible with Furuno Single Band Low Frequency CHIRP, 12-pin transducers.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Garmin 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Garmin 12-pin plug on the other side. 

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Humminbird 14-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Humminbird 14-pin plug on the other side. Compatible with Low Frequency Transducers.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Garmin 8-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Garmin 8-pin plug on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Garmin 8-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Garmin 8-pin plug on the other side. Compatible with Low Frequency CHIRP only.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Navico 9-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a (2) Navico 9-pin plugs on the other side (Y-Cable).

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Navico Blue Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Navico Blue plug on the other side.

The Airmar 20' Extension Cable for CHIRP Mix & Match Cables is 6m in length and extends the length of your Airmar Mix & Match Cable. This cable features a 12-pin Mix & Match male end, and a 12-pin Mix & Match female end. 

The Airmar Mix & Match Cable with 600W FISO Connector is 8m in length and has a 5-pin 600W Mix and Match end on one side and a FISO connector on the other side.

The Airmar Mix & Match Cable with Raymarine DSM Connector is 9m in length and has a 5-pin 600W Mix and Match end on one side and a Raymarine DSM connector on the other side.

The Airmar Mix & Match Cable with Raymarine a-Series Connector is 9m in length and has a 5-pin 600W Mix and Match end on one side and a Raymarine a-Series connector on the other side.